Call (858) 483-4130

Go to…

Hyundai

Home / Hyundai / Page 4

We Service and Repair all Hyundai cars

  • 2013 Hyundai Sonata

    Hyundai Sonata
    Mileage
    107,791
    Service Date
    11/9/2020
    Services Performed
    • HEADLAMP BULB – Remove & Replace – Both – [DOES NOT include adjustment.]
     
    KEN K. gave our service a 5 star review on 11/10/2020

  • 2013 Hyundai Elantra GT

    Hyundai Elantra GT
    Mileage
    55,770
    Service Date
    10/23/2020
    Services Performed
    • CRANKSHAFT POSITION SENSOR – Remove & Replace – All Applicable Models
    • FUEL GAUGE TANK UNIT – Remove & Replace – All Applicable Models – [Includes: Drain and fill.](FAULTY, CODE P0463 – DEFECTIVE SENDER)
    • Quote is for 5 quarts of Multi-grade non-synthetic motor oil per manufacturer specifications, additional quarts, grades, or synthetic oils extra — Drain and refill motor oil — Replace oil filter — Replace oil drain plug sealing washer if applicable
    • ROTATE THE TIRES FROM FRONT TO REAR (INCLUDES A COMPLIMENTARY BRAKE INSPECTION)
    • Services performed by ASE certified technician: FOUND CODES P0463 FUEL LEVEL SENSOR HIGH INPUT, P0335 CRANK SHAFT POSITION SENSOR A CIRCUIT. BOTH HISTORY CODES, WE WERE UNABLE TO DUPLICATE CUSTOMERS CONCERN. RECOMMEND REPLACE THE CRANK POSITION SENSOR AS AN EDUCATED GUESS AND TREND OF FAILURE.
    • CALIFORNIA RECYCLING FEE
    • Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
    • GAS
    • TOW CHARGE
     
    ROBIN R. gave our service a 5 star review on 10/23/2020

  • 2013 Hyundai Sonata

    Hyundai Sonata
    Mileage
    105,932
    Service Date
    8/5/2020
    Services Performed
    • CHECK THE DRIVERS FRONT WHEEL, IT MIGHT BE LEAKING, CHECK THE FRONT TIRES AND ADVISE
    • Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades extra — Drain and refill motor oil — Replace oil filter — Replace oil drain plug sealing washer if applicable
    • SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
    • THE CONNECTOR WAS LOOSE, WE RECONNECTED THE HEAD LIGHT AND ITS WORKING NOW.
    • CALIFORNIA RECYCLING FEE
    • Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
    • DUALTONE INVOICE#
    • WHEEL REPAIR – BENT AND LEAKING
     
    KEN K. gave our service a 5 star review on 8/6/2020

  • 2011 Hyundai Sonata

    Hyundai Sonata
    Mileage
    118,493
    Service Date
    6/13/2020
    Services Performed
    • CLEAN AND LUBE SLIDERS CLEAN SURFACE WHERE ROTORS MATE TO HUBS
    • MASTER CYLINDER – Remove & Replace – Gas
    • Quote is for 5 quarts of Multi-grade non-synthetic motor oil per manufacturer specifications, additional quarts, grades, or synthetic oils extra — Drain and refill motor oil — Replace oil filter — Replace oil drain plug sealing washer if applicable
    • –Remove old brake fluid from reservoir –Check and clean the reservoir if applicable –Install new brake fluid –Power bleed the system
    • SEE BELOW
    • CALIFORNIA RECYCLING FEE
    • Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
     
    PAM B. gave our service a 5 star review on 6/13/2020

  • 2008 Hyundai Accent

    Hyundai Accent
    Mileage
    123,475
    Service Date
    1/21/2020
    Services Performed
    • CAMSHAFT POSITION SENSOR – Remove & Replace – Each
    • CRANKSHAFT POSITION SENSOR – Remove & Replace – All Applicable Models
    • Services performed by ASE certified technician: –Use of hand held scan tools and/or laptop computer programs to access trouble codes causing check engine light –Use of computer diagnostic programs –Use of internet subscription technical sites –Use of up to one hour of ASE certified technician's time to determine the source of the problem causing the trouble code –Most but not all check engine lights or other driveability problems can be determined by the Check Engine Light/Level 1 Diagnostic service –Sometimes additional diagnostics may be required –FOUND DTC P0337 – CRANK POSITION SENSOR LOW –FOUND DTC P0339 – CRANK POSITION SENSOR CIRCUIT MALFUNCTION –SEE REPAIRS BELOW
     
    JERRI F. gave our service a 5 star review on 1/22/2020

  • 2013 Hyundai Sonata

    Hyundai Sonata
    Mileage
    100,006
    Service Date
    1/4/2020
    Services Performed
    • –CLEANED OFF THE LENS BUT THE CAMERA DISPLAY IS STILL BLURRY, SUSPECT SOMETHING INTERNAL IN THE UNIT IS FAULTY, WOULD NEED FURTHER DIAGNOSIS OR TAKE TO CAR ALARM SHOP FOR INSPECTION
    • –NO SUSPENSION DAMAGE REPORTED BUT THE TIRES ARE OUT OF BALANCE, TAKE TO TIRE SHOP OR RESCHEDULE TIRE BALANCE APPOINTMENT
    • Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, additional quarts, grades extra — Drain and refill motor oil — Replace oil filter — Replace oil drain plug sealing washer if applicable
    • –REPLACE THE RIGHT BRAKE LIGHT BULB – BURNED OUT, LEFT REAR BRAKE LIGHT BULB RECENTLY REPLACED BY US
    • SPARK PLUGS – Remove & Replace – All
    • CALIFORNIA RECYCLING FEE
    • Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
     
    KEN K. gave our service a 5 star review on 1/4/2020

  • 2014 Hyundai Elantra

    Hyundai Elantra
    Mileage
    84,450
    Service Date
    10/12/2019
    Services Performed
    • REPLACE THE #3 IGNITION COIL
    • Services performed by ASE certified technician: –Use of hand held scan tools and/or laptop computer programs to access trouble codes causing check engine light –Use of computer diagnostic programs –Use of internet subscription technical sites –Use of up to one hour of ASE certified technician's time to determine the source of the problem causing the trouble code –Most but not all check engine lights or other driveability problems can be determined by the Check Engine Light/Level 1 Diagnostic service –Sometimes additional diagnostics may be required –FOUND DTC 0303 – CYLINDER #3 MISFIRE –FOUND THE #3 IGNITION COIL FAULTY
     
    PATRICIA L. gave our service a 5 star review on 10/20/2019

  • 2013 Hyundai Accent

    Hyundai Accent
    Mileage
    45,110
    Service Date
    3/31/2018
    Services Performed
    • REPLACE THE LEFT FRONT STRUT MOUNT, INSULATOR AND BEARING, NOISY
     
    doug m. gave our service a 5 star review on 4/19/2018

  • 2007 Hyundai Elantra

    Hyundai Elantra
    Mileage
    253,205
    Service Date
    3/1/2018
    Services Performed
    • REPLACE THE LEFT HEADLIGHT BULB
    • CLEAN AND LUBE SLIDERS CLEAN SURFACE WHERE ROTORS MATE TO HUBS
    • REMOUNT THE LEFT FRONT TIRE AND BALANCE (MOUNTED ON RIM BACKWARD)
     
    NIKITA (NICK) P. gave our service a 5 star review on 3/3/2018

  • 2013 Hyundai Sonata

    Hyundai Sonata
    Mileage
    73,989
    Service Date
    2/19/2018
    Services Performed
    • — Identify refrigerant in use and check for contamination — Evacuate and charge A/C system with refrigerant — Add ultra-violet A/C dye to system — Examine exposed hoses, tubing and connections for damage/leaks — Examine compressor/clutch for damage/leaks** — Examine compressor for missing caps, proper labeling** — Rotate the compressor to determine if faulty — Examine the condensor coil for damage/restrictions/leaks — Examine the expansion device for damage or leaks** — Examine the accum./receiver/drier for damage or leaks — Check the drive belt system — Inspect fan clutch for leakage and bearing wear — Check fan clutch for proper operation — Inspect the cooling fan for bent or missing blades — Examine accessible electrical connections — Check system for leakage at a minimum of 50 psi — Check operation of the compressor clutch — Check operation of blower motor and air control doors ** If accessible LEAKS DETECTED: NONE AT THIS TIME PARTS DEFECTIVE: NONE AT THIS TIME Final high side operating pressure reading: 120 PSI Final low side operating pressure reading: 30 PSI Final center air distribution outlet temperature: 38 DEGREES F
    • – Inspect disk brake pads, front and/or rear – FRONT BRAKE PADS 1-2MM AND REAR 8MM – Inspect rear brake shoes if applicable – Inspect rotors for scoring – Inspect cylinder/boot for leaks – Inspect calipers – Inspect pad retainer condition – Inspect anti-rattle springs in bushings – Inspect wheel bearing end play – Inspect wheel free rotation
    • CLEAN AND LUBE SLIDERS CLEAN SURFACE WHERE ROTORS MATE TO HUBS
    • –Remove old brake fluid from reservoir –Check and clean the reservoir if applicable –Install new brake fluid –Power bleed the system
    • Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
    • PERFORM A FUEL SYSTEM CLEANING
     
    KEN K. gave our service a 5 star review on 2/20/2018