Services Performed
- Quote is for 5 quarts of Multi-grade synthetic motor oil per manufacturer specifications, extra quarts, grades, or special synthetic oil extra –Oil and filter change – replace the drain plug gasket where applicable –Replace the air filter –Replace the cabin air filter –Pressure test the cooling system –Load test the battery –Rotate the tires – NO –Inspect the tires and adjust the tire pressure –Check and top off all fluids –Check the front and rear brakes –Inspect the brake master cylinder and brake flex hoses –Inspect the brake calipers and wheel cylinders –Clean and adjust the rear brakes – where applicable –Inspect the drive belts –Inspect the vehicle's exterior lights –Inspect the front and rear shocks and or struts –Inspect the front and rear suspensions –Inspect constant velocity joint boots –Inspect the steering linkage –Inspect the exhaust system –Check and adjust the idle speed – where applicable –Check the A/C temp –Lube all door hinges –Reset the service light –Road test the vehicle
- Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
- CALIFORNIA RECYCLING FEE
- — Identify refrigerant in use and check for contamination — Evacuate and charge A/C system with refrigerant — Add ultra-violet A/C dye to system — Examine exposed hoses, tubing and connections for damage/leaks — Examine compressor/clutch for damage/leaks** — Examine compressor for missing caps, proper labeling** — Rotate the compressor to determine if faulty — Examine the condensor coil for damage/restrictions/leaks — Examine the expansion device for damage or leaks** — Examine the accum./receiver/drier for damage or leaks — Check the drive belt system — Inspect fan clutch for leakage and bearing wear — Check fan clutch for proper operation — Inspect the cooling fan for bent or missing blades — Examine accessible electrical connections — Check system for leakage at a minimum of 50 psi — Check operation of the compressor clutch — Check operation of blower motor and air control doors ** If accessible LEAKS DETECTED: ______NONE_____________ PARTS DEFECTIVE: ___________________ Final high side operating pressure reading: ___150___ PSI Final low side operating pressure reading: ___40___ PSI Final center air distribution outlet temperature: __40__ DEGREES F
JASMINE M. gave our service a 5 star review on 2/12/2025