Mileage
147,699
Service Date
10/20/2017
Services Performed
- — Identify refrigerant in use and check for contamination — Evacuate and charge A/C system with refrigerant — Add ultra-violet A/C dye to system — Examine exposed hoses, tubing and connections for leaks — Examine compressor/clutch for damage/leaks** — Examine compressor for missing caps, proper labeling** — Rotate the compressor to determine if faulty — Examine the condensor coil for damage/restrictions/leaks — Examine the expansion device for damage or leaks** — Examine the accum./receiver/drier for damage or leaks — Check the drive belt system — Inspect fan clutch for leakage and bearing wear — Check fan clutch for proper operation — Inspect the cooling fan for bent or missing blades — Examine accessible electrical connections — Check system for leakage at a minimum of 50 psi — Check operation of the compressor clutch — Check operation of blower motor and air control doors ** If accessible LEAKS DETECTED: NONE CURRENTLY, INJECTED DYE PARTS DEFECTIVE: NONE, WAS A LITTLE LOW ON REFRIG. Final high side operating pressure reading: 150 PSI Final low side operating pressure reading: 30 PSI Final center air distribution outlet temperature: 34 DEGREES F
- –Remove old brake fluid from reservoir –Check and clean the reservoir if applicable –Install new brake fluid –Power bleed the system
- Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
- PERFORM A FUEL SYSTEM CLEANING
- REPLACE THE ENGINE STRUT ROD – BROKEN
GINA V. gave our service a 5 star review on 10/21/2017