Mileage
112,274
Service Date
2/28/2020
Services Performed
- – Load test the battery and check the connections – PASSED – Check drive belts -OK – Check the alternator output __12.5_ – FAILED – Check the wiring at the alternator – ALTERNATOR WIRING IS OK. – Check for excessive draws on the battery – NO EXCESSIVE DRAWS AT THIS TIME.
- ALTERNATOR ASSEMBLY – Remove & Replace – V6,3.0L Eng
- CLUTCH MASTER CYLINDER – Remove & Replace – All Applicable Models
- FLYWHEEL, CLUTCH KIT AND SLAVE CYLINDER. (STD TRANS) – Remove & Replace – V6,3.0L Eng,RWD
- FOUND A DEFECTIVE CLUTCH, SLIPPING IN HIGHER RPM, THE MASTER CYLINDER LEAKING. RECOMMEND REPLACE THE CLUTCH, MASTER CYLINDER AND SLAVE CYLINDER AT THE SAME TIME.
- –Remove old brake fluid from reservoir –Check and clean the reservoir if applicable –Install new brake fluid –Power bleed the system
- Charges are for proper disposal of hazardous waste generated during repairs/ service to your motor vehicle. Such charges include but not limited to,all engine and drive train fluids and any other hazardous waste as described by law.
CHUCK A. gave our service a 5 star review on 2/28/2020